Getinge Trays, Baskets an Accessories for wash carts

These instrument trays are suitable for instrument sets and smaller parts.

Mesh size: 6,5 mm

This lid can be locked onto the trays to assure that instruments and smaller parts remain inside the instrument tray.

Mesh size: 6,5 mm

This instrument tray is suitable for instrument sets ans smaller parts.

Mesh size: 6,5 mm

This tight-mesh inner basket is used for smaller instruments or parts of instruments. The basket assures that these small instruments will not disappear during the wasing phase.

Mesh size: 1,5 mm

This tight-mesh inner basket is used for smaller instruments or parts of instruments. The basket assures that these small instruments will not disappear during the wasing phase.

Mesh size: 1,5 mm

This basket is deeper and suitable for bulkier instruments.

Mesh size: 4 mm

This tight-mesh basket with handles is well suited for smaller and sharper instruments.

Mesh size: 1,5 mm

This basket is fine meshed and is equipped with a lid. Well suited for smaller instruments and parts of instruments.

Mesh size: 1,5 mm

This basket is suitable for washing and disinfecting laparascopic instruments. The lid provides an extra security during the washing process.

Mesh size: 13 x 13 mm

This special tourniquet holder can be placed on any wash cart where space allows.

This instrument tray is particularly suitable for nasal specula. The curved forms hold the instruments securely during the process.

This type of instrument holder is suitable for delicate instruments which should not lie directly on the stainless steel trays. In this case, instruments are held between the green mats. Lower and upper holders must be used together and combined with an instrument tray. The tray will protect the holders. Suitable for SPRI ISO II.

Measures: 325 x 235 mm.

Instruments are placed between the two holders and held securely in place in the washer-disinfector. The two lower sawtooth parts of soft rubber material are adjustable in width from 60 to 210 mm. The upper holder allows two holding heights: 8 and 13 mm.

This spring is mounted in the instrument tray and holds down the instruments and various smaller pieces during the washing process. The spring can also be used toaffix instruments or plastic pieces directly to the wash cart.

This holder makes sure your hoses are correctly washed during the process. The cylinder shape is optimal for washing and disininfection.

This stand is mounted on a rack for tubular instruments or a MIS ramp. Suitable for canulas 5 - 10 mm and for connecting silicone hoses with nipples.

This hose jet is used for connecting a silicone hose to the injector pipe of a rack for tubular instruments or for instance a MIS instrument ramp for an OP-cart. The jet is screwed onto the rack or ramp.

Below you will find different kinds of jets which can be screwed onto either a rack for tubular instruments or a MIS ramp.

Injection pipes are mounted on the stand for canulas and can be used for enhancing the cleaning and disinfection of tubular instruments.

This Luer jet is connected to a silicone hose and can then be connected to a tubular instrument with a luer connection, assuring excellent water flow inside the tubular instrument. Available with male and female connections and with different measurements.